迪庆州附近有没有服务

Hello, welcome to Suzhou Wujiang Shenzhou bimetal Cable Co., Ltd!
 China Service Hotline
Product classification
news information

Suzhou Wujiang Shenzhou bimetal Cable Co., Ltd

Address: xintianwan Industrial Zone (middle Wuyue Road), Qidu Town, Wujiang City, Jiangsu Province

Contact person: Zhang Yong / 13913089910

Tel: 0512-63803202

Fax: 0512-63801633

Post code: 215234

Email: sales@ike-amadi.com

website: shenzhoucable.1688.com ike-amadi.com

UL certified aluminum enameled wire

Your location: home page > Product display > Aluminum enameled wire >UL certified aluminum enameled wire

UL certified aluminum enameled wire

Classification: Aluminum enameled wire

Name: UL certified aluminum enameled wire
Origin: Wujiang City

detailed information

UL certified aluminum enameled wire

Parameters:
Model: UE / PE / EI / eiwa
Insulation properties: polyesterimide copper-clad aluminum enameled wire / polyamide imide enameled wire
Conductor: more than 99.7% pure aluminum
Sheath material: polyurethane, polyamide imide
Tensile strength: 90-130mp

Large outer diameter of wire: 5.0 (mm)
Material shape: circular line
Product certification: RoHS, UL

 

Basic overview:

one UL certified aluminum enameled wire The paint must be removed. The mechanical (paint remover, paint scraping) and chemical (paint removal water and paint powder) can be used for paint removal. It is recommended to use chemical paint removal. After chemical paint removal, the solder joint must be fully rinsed; mechanical method should not be used to prevent aluminum wire from scratch, burr and toughness weakening; high temperature tin hot paint should not be used. As for the suggestions of Xiaobian, please follow the statement of Xiaobian in the process of operation.
2. For the connection of UL certified aluminum enameled wire and lead wire, the aluminum wire should be wound outside the copper lead wire with a small arc, which can reduce the occurrence of false welding and improve the welding strength.
3. Different welding temperature should be adopted for different tin: the welding temperature of aluminum special tin bar is 330 ℃, the welding temperature of ordinary lead-free tin bar is about 285 ℃, and the welding temperature of tin with lead is 265 ℃. As the melting point of aluminum is relatively low, it is easy to melt into the tin pot. Therefore, Wujiang Shenzhou bimetal Cable Co., Ltd. suggests that when welding smaller diameter UL certified aluminum enameled wire (below 0.4mm), the temperature should be controlled within 300 ℃ to reduce the melting speed of aluminum wire and prevent aluminum wire from embrittlement. Do not use high temperature tin soldering.
4. Due to the instability of aluminum, it is recommended to remove the paint immediately and weld immediately, and do not let the paint removed UL certified aluminum enameled wire If the wire ends are exposed to air for a long time to prevent oxidation, it is conducive to welding. Generally speaking, it is necessary to weld within 5 hours after depainting. If there is no welding, it is necessary to cut off and remove the paint again.
5. The manufacturer can make the depainting length according to the welding length, that is, how long to weld and how long to remove the paint. Don't let the aluminum exposed in the air, so as to bury the hidden danger for the solder joint.
6. During immersion welding, gently shake 2-3 times in the tin pot to avoid bubbles.
Each point in the above 6 points of sharing is a small editor's reference to a lot of relevant articles, which should be very helpful to all netizens, so we still suggest that you can refer to more.

 

Photo display:

 UL certified aluminum enameled wire

Product quick navigation

Main products: QA copper clad aluminum enameled wire RoHS enameled wire high temperature resistant enameled wire round copper aluminum enameled wire copper clad aluminum wire environmental protection copper clad aluminum enameled wire copper clad aluminum enameled wire polyester imide copper clad aluminum enameled wire RoHS enameled wire high temperature enameled wire

copyright: Suzhou Wujiang Shenzhou bimetal Cable Co., Ltd Address: xintianwan Industrial Zone (middle Wuyue Road), Qidu Town, Wujiang City, Jiangsu Province

Postcode: 215234 contact person: Zhang Yong 13913089910 Tel: 0512-63803202 Fax: 0512-63801633

E-mail: Sales @ ike-amadi.com website: ike-amadi.com

technical support: Hangzhou Sixi

Su ICP Bei 17032539